TCGE-0524-IR00
Drawing Hydraulic symbol
www.eltfluid.com
For general conditions and terms of use see page S.005.
This document is Elt Fluid property and therefore data or technical specification can
not be reproduced.
Eltfluid also reserves the right to modify all the above data, at any time.
Pressure drop
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
Drawing Hydraulic symbol
Oil viscosity: 46 cSt (217 SSU) Fluid temperature: 40 °C
3UHVVXUHEDUSVL
)ORZOSPJSP
)ORZIURPWR
)ORZIURPWR
Electric valve
1.08.003.1
1
2
E08N-24K
TECHNICAL DATA
HYDRAULIC
Max. working pressure: 210 bar (3.045 psi)
Flow rate: 15 l/min (4 gpm)
Fluid:
Viscosity:
Mineral based oil
From 15cSt to 250 cSt
Leakage: 0,50 cc/min (10 drops/min)
P max. 210 bar (3.045 psi)
Standard seals: O-ring NBR Seals Polyurethane
Cavity: SCN0820
Installation torque: 30 Nm
Coil nut torque: 2 Nm
Max contamination level: NAS 8 ISO 4406 19/17/14
Fluid temperature range: From -20 °C to +80 °C
Seal kit std.: 5AG0018
ELECTRIC
Type of voltage: DC
Insulation index: H
Nominal voltage: +/- 10 %
Power at 20 °C: 20,5 W
ED*: 100% with ambient temperature range -20 °C
+40 °C
Coil code:
(see page 9.01.002)
S130-20S
*Note: For temperature or special conditions contact our sales department.
Description
Electric cartridge valve on/off designed to hold the load or block
flow at high pressure application, where low leakage is requested.
Operation mode
COIL NOT POWERED: the valve in closed position blocks flow in
both directions.
From 2 to 1 and 1 to 2.
COIL POWERED: the valve allows flow in both directions.
From 2 to 1 and from 1 to 2.
GENERAL DATA
Weight without coil: 0,14 Kg (0,31 lbs).
Ambient temperature range: -30 °C a 60 °C with standard seals
(NBR).
Max. proof pressure: 250 bar (3.625 psi).
Flow Max: 15 l/min (4 gpm)
Cartridge materials: high strength steel, internal parts hardened and
grinding.
Solenoid valve 2 ways 2 positions,
poppet direct operated, normally closed
*Note: Information about manual
override is available at page S.001
STANDARD HOUSING
Ordering code: See page 9.02.001
Material*: Aluminium/Steel
Max working pressure for aluminum body: 210 bar
Max working pressure for steel body: 350 bar
*Note: To correctly select the material, in relation to application, see page S.003.
Voltage
Seals
DN- Din
DU- Deutsch
AM- Amp Junior
2B- 1/4” BSP
3B- 3/8” BSP
2S- SAE 6
3S- SAE 8
24- Vdc
12- Vdc
Connector
None (std. without coil)
None (std. without override)
Options*
None (std. only cartridge)
Housing size ports
A- Aluminium
Material std. housing
S- Steel
Y- Polyurethane
None (std. without filter)
Screen Filter
F- Filter
-
-
-
TCGE-0524-IR00
Ordering code
Inches
Millimeters
Dimensions
For other options
contact Sales dept.
Elt Fluid S.r.l.
Via Ganapini, 15/2
Loc. Felina 42035
Castelnovo ne’ Monti (RE) ITALY
mail: info@eltfluid.com
P.IVA/C.F 02573790355
1.08.003.2
E08N-24K
81)$
+H[
5
E08N-24K
P- Push
PT- Push and twist
SV- Screw in
EC- Push pin
None (std. NBR) + Polyurethane
